Full-Waveform Inversion for High-Resolution Reservoir Characterization
|Prof. Dr Dries Gisolf (Delft Inversion, Delft, Netherlands)|
|Geophysics – Surface Imaging|
|10 CPD points|
AVO ELASTICITY FOURIER INTERPRETATION KIRCHHOFF RADON TRANSFORM REFLECTION SCATTERING WAVE EQUATION WAVELET
The purpose of this course is to teach participants the fundamentals of extracting quantitative property information from seismic data. In the end this leads to an inversion process, which is called linear if the data are supposed to consist in primaries only and is non-linear if all multiple scattering and multiple mode conversion over a target interval (typically 500 m around the reservoir) is taken into account. Non-linear inversion leads to a higher resolution than obtained from conventional linear inversion techniques.
All steps required in these processes are based on wave equations and it is important, therefore, to have a good understanding of acoustic and elastic wave equations. In linear (AVO) inversion, first the reflection coefficients are derived from the data and subsequently the rock properties are derived from the reflection coefficients. In non-linear inversion, the properties are directly derived from the data. Non-linear inversion is an iterative process of which the first iteration (the Born approximation) represents the linear inversion result. The method is based on an integral representation of the wave equation.
An important aspect of reservoir oriented full-waveform inversion (FWI-res) is that the surface recorded data are localized (focused) to the target area. This can be achieved by redatuming or by local demigration of migrated data.
Both the linear AVO data model in terms of reflection coefficients and the non-linear data model in terms of property contrasts against backgrounds are presented. Inversion, linear, or non-linear, requires regularization. Several regularization options are presented.
Finally, linear and non-linear inversions at the reservoir scale are demonstrated by highly realistic synthetic reservoir models and real data case studies. The real data case studies include the extraction of low-frequency models (backgrounds) from well data and the extraction of angle dependent wavelets from the seismic-to-well match.
Upon completion of the course, participants will be able to:
- Understand what quantitative property information is contained in seismic data and how to extract it.
- Make better judgements as to what inversion method to apply to what problem.
- Adopt a more quantitative approach to seismic-to-well matching and low frequency background model extraction
- Further the role of reservoir geophysics in multidisciplinary projects.
- Short recap on complex integral transforms (Fourier, Laplace, F/K and linear Radon)
- The acoustic wave equation in inhomogeneous media
- Integral representations of the acoustic wave equation; Kirchhoff-Rayleigh and the Scattering Integral (Lippmann-Schwinger)
- The AVO data model; Zoeppritz reflection coefficients
- Linear inversion of AVO data including regularisation; synthetic and real data examples
- The non-linear data model for inversion; data equation and object equation; iterative, multiplicatively regularised inversion
- Applications based on an elastic full wavefield non-linear data model; realistic synthetic reservoir study, real data case studies including low- frequency model extraction and seismic-to-well matching. Synthetic time-lapse example.
This course is designed for geophysicists active in reservoirs and/or quantitative interpretation and processing geophysicists who would like to become involved in quantitative interpretation.
Participants should have a basic training in geophysics and mathematics, particularly complex numbers and integrals.
About the instructor
Prof. Dr Dries Gisolf graduated from the Delft University of Technology in 1971 and obtained his PhD at the University of Utrecht in 1975. In 1976 he joined Shell International Research Co. in Rijswijk, The Netherlands, as a seismic data processing geophysicist. Between 1980-2000 he held various positions for Shell in Oman, The Netherlands, Australia, Malaysia and Nigeria. Throughout his career with Shell he was involved in acquisition, processing and interpretation of seismic data, with an emphasis on quantitative prediction of reservoir properties. In September 2000 he was nominated as Professor of Acoustical Imaging and Sound Control at the Faculty of Applied Sciences at the Delft University of Technology. After retiring from TU Delft in 2010, he co-founded Delft Inversion in 2012, a service company providing high-resolution reservoir oriented inversion services to the oil and gas industry.
Explore other courses under this discipline:
Instructor: Prof. Tariq Alkhalifah (KAUST)
The course starts by introducing the fundamentals of full-waveform inversion (FWI) starting from its basic definition. It focuses on the model update issues and provides analysis of its probable success in converging to a plausible model. In the course we will discuss the many challenges we face in applying FWI on seismic data and introduce modern day proposed solutions to these challenges. The focus of the course will be on FWI applied to anisotropic media. As a result, the course will also introduce anisotropy, its optimal parametrization and wavefield simulation in such media. Practical multi-parameter inversion for anisotropic parameters requires an optimal FWI setup. We will discuss such a setup, which includes the proper parametrization of the medium and data access scheme necessary for a potential convergence to a plausible anisotropic model.
Instructor: Dr Gerard Schuster (KAUST)
This one-day course is designed for a broad range of seismic researchers, data processors, and interpreters working in the petroleum industry. The course teaches the principles of seismic interferometry, ambient noise seismology and their applications to surface seismic, VSP, and OBS data. The ultimate objectives are to enable geophysicists to evaluate the potential of seismic interferometry in uniquely solving their problems.
Instructors: Prof. Evgeny Landa (Tel Aviv University) and Dr Tijmen Jan Moser (Moser Geophysical Services)
Diffractions have been identified as the key seismic manifestation of fractures and other small-scale reservoir heterogeneities. This two-day course will present the current state-of-the-art of diffraction technology and put this in context by a review of its past developments. The course will cover both forward diffraction modeling and diffraction imaging. Case studies of diffraction imaging will be presented covering applications in seismic exploration and other areas of geoscientific interest.
Instructor: Prof. Dr Aldo Vesnaver (The Petroleum Institute)
Building a 3D Earth model in depth is needed not only for accurate seismic imaging, but also for linking well data (as logs and cores) and reservoir simulations. Tomography can build a 3D macro-model for P and S velocities that integrates surface and well data, as well as active and passive seismic. This short course will introduce the basic concepts of traveltime inversion keeping all the math at a very basic level.
Instructor: Dr Ruben Martinez (Reservoir Geoscience)
This course has two main segments. In the first segment, the participant will understand the basic concepts behind the tools commonly employed in velocity model building and depth migration.
In the second segment, the participant will learn how to use these tools for building velocity models and generate seismic images in depth using practical work flows for a variety of complex geologic scenarios. At the end of the course, an overview of the emerging depth imaging technologies is presented.
Instructor: Prof. Evgeny Landa (Tel Aviv University)
While depth imaging play an increasing role in seismic exploration, data analysis and imaging in time domain play an important role. Moreover, for complex models that request the use of prestack depth migration, time imaging usually constitutes a key first step. The proposed course discusses: a) data analysis and imaging based on new procedures such as Multifocusing and Common Reflection Surface; b) diffraction Imaging based on diffracted energy targeting to image small scale subsurface objects; c) imaging without precise knowledge of the subsurface velocity model (path summation); d) pitfalls and challenges of seismic inversion.
Instructor: Mr Etienne Robein (ERT)
The course will present in simple terms (cartoons rather than equations!) the principle of different techniques in each class of methods (Kirchhoff, Beam Migrations, WEM, RTM), while pointing out their respective merits and limitations. Similarities and differences between Time- and Depth-Imaging will be briefly reminded. In parallel, special emphasis is put on methods used to build the necessary anisotropic velocity models. Both Ray-based techniques (linear and non-linear tomography) and wavefield extrapolation-based ones, including Full Waveform Inversion, are addressed.
Instructor: Prof. Dr Dries Gisolf (Delft Inversion)
This two-day course will start with an introduction and a short recap on complex integral transforms (Fourier, Laplace, F/K and linear Radon). Followed by topics on: - The acoustic wave equation in inhomogenous media - Integral representations of the acoustic wave equation; Kirchhoff-Rayleigh and the Scattering Integral (Lippmann-Schwinger) - The AVO data model; Zoeppritz reflection coefficients - Linear inversion of AVO data including regularisation; synthetic and real data examples - The non-linear data model for inversion; data equation and object equation; iterative, multiplicatively regularised inversion - Applications based on an elastic full-wavefield non-linear data model; realistic synthetic reservoir study, real data case studies including low-frequency model extraction and seismic-to-well matching. Synthetic time-lapse example.
Instructor: Mr Piet Gerritsma (Gerritsma Geophysical Training and Consultancy)
The process of migration, whereby a proper image in time or depth of the subsurface is obtained, is directly related with the velocity model that both serves as input for the migration process as well as is the result of such a migration. Therefore migration and velocity model building are intimately related processes and often applied in an iterative mode. This course gives an overwiew with theory and implementation of the representative migration algorithms as well as of the multitude of ways to build and update subsurface velocity models.
Instructor: Prof. Dr Dries Gisolf (Delft Inversion)
This course presents a systematic approach to imaging of acoustic reflection data and the extraction of media property information from the image amplitudes, based on wave theory. Although the approach is valid for a wide range of acoustical frequencies and applications, there is a bias towards seismic imaging.