Geophysics - Surface Imaging

Borehole Seismic Fundamentals and Introduction to Advanced Techniques

 

Instructor

  Mr Allan Campbell (VSP Consultants LLC)

Duration

  2 days

Disciplines

  Geophysics – Seismic  Processing

Level

  Intermediate

Language

  English

EurGeol

  10 CPD points

Keywords

 
 2D   3D   4D   ANISOTROPY   ATTENUATION   AVO   BOREHOLE GEOPHYSICS    CASE STUDY   FRACTURES   FULL WAVEFIELD   IMAGING   KIRCHHOFF  LAND SEISMIC   MARINE SEISMIC   OFFSHORE   OIL AND GAS   RTM   TIME-LAPSE  TOMOGRAPHY   TRAVELTIME   VELOCITIES   VSP   VTI

 

Course description

This course has 6 sections. The course moves from giving a basic understanding of the most common surveys towards the newest techniques being developed to solve modern problems.

1. Introduction to Vertical Seismic Profiling
The VSP techniques used in industry are introduced. Basics of wireline acquisition, and an introduction to fiber based acquisition are covered. This section gives a brief overview of the value of all the commonly used borehole seismic techniques, from checkshot through to 3D VSP.

2. The Basics
Checkshot (velocity survey) and zero-offset VSPs are widely used, are simple to acquire and process, and have huge value. This section will describe acquisition, processing and interpretation of these basic, but possibly the most important, surveys.

3. 2D and 3D Imaging
This section will focus on designing and interpreting walkaway VSP and 3D VSP surveys. Down-hole receivers create the opportunity for higher resolution images than surface seismic can provide, and can provide images in poor seismic imaging areas, or images where surface access is difficult. Advanced processing techniques will be discussed. Specifics of survey planning and acquisition will be covered.

4. Anisotropy and More
The anisotropy module will focus on extracting VTI and HTI anisotropy parameters from walkaway VSP and 3D VSP surveys. Seismic may be improperly imaged due to poor anisotropy assumptions. Stress and fracturing information may be deduced from seismic and validated with VSP. Having receivers down-hole and sources at the surface creates an ideal opportunity to measure anisotropy in-situ. Ground truth measurement of AVO can be made with receivers downhole, this section describes the various VSP AVO techniques in common use. Downhole arrays are also ideal for locating multiple generators and measuring Q which we cover in this section.

5. Reservoir Monitoring and Reservoir Properties
This section focuses on time-lapse 3D VSP, which can observe reservoir changes with a greater precision than is possible with surface seismic. There is an overview of fracture detection and orientation with VSPs. Elastic FWI is being developed to measure the reservoir's elastic properties, and will be briefly covered. A discussion on very high resolution imaging and tomography with Crosswell seismic finishes the module.

6. Advanced Acquisition
Technology marches forward as limitations are reached in wireline acquisition. Putting the receivers in the drill string to get real-time VSPs (while drilling) is becoming routine. Optical fiber (DAS) recording is an emerging technology which enables efficient, fit-for-purpose VSP surveys with cost benefits over traditional wireline technology.

 

Course objectives

Upon completion of the course, participants will know the basics of acquiring and processing borehole seismic data. They will also be familiar with the latest borehole seismic techniques in:

• High resolution imaging using 2D and 3D VSP surveys;
• Anisotropy determination and fracture analysis;
• Reservoir monitoring using time lapse VSP and crosswell seismic;
• Alternative acquisition schemes such as SWD and DAS.

Participants will have a better understanding of the role of borehole seismic techniques in hydrocarbon exploration and production. They will be able to more knowledgeably participate in the design, planning and execution of advanced surveys and be comfortable with the interpretation of these surveys.

 

Course outline

The course will contain the following modules:

1. Introduction to Vertical Seismic Profiling (1.5hrs)

2. The Basics (2 hrs)
a. Checkshot VSP
b. Zero Offset VSP

3. VSP Imaging: 2D and 3D Techniques (2 hrs)
a. Survey design and modeling
b. Processing
- model building, tomography, imaging techniques (Kirchhoff, RTM)
c. 2D imaging
- Offset VSP, Walkaway VSP
d. 3D imaging

4. Anisotropy and More (3 hrs)
a. Measuring anisotropy with walkaway and 3D VSPs
-VTI and HTI, fractures
b. AVO Analysis
c. Techniques to locate multiple generators with VSP data
d. Q estimation and Q compensation with VSP data

5. Reservoir Monitoring and Reservoir Properties (1.5 hrs)
a. Time Lapse 3D VSP for reservoir monitoring
b. Elastic FWI (VSP Inversion)

6. Advanced Acquisition (1.5hrs)
a. Seismic while drilling
b. Distributed Acoustic Sensing

Timing of sections may change.

 

Participants' profile

The course is targeted toward those who have a basic understanding of surface seismic acquisition and processing, but only limited knowledge of borehole seismic. The course is designed to help participants identify borehole seismic solutions to common seismic interpretation problems. It is also be useful for those geophysicists needing higher resolution images than surface seismic can provide, and those geophysicists who need to validate seismic processing parameters and imaging models using borehole seismic. Lastly, the course is relevant for geophysicists wanting to learn how to use borehole seismic as a cost-effective reservoir monitoring tool.

 

Prerequisites

Participants are assumed to have knowledge of seismic response to earth reflectivity. Participants should be aware of common well logging services.

 

About the instructor

Allan CampbellAllan Campbell graduated in 1984 from the Northern Alberta Institute of Technology in Edmonton with a diploma in Earth Resources Technology and, after a spell in Dresser Atlas, graduated in 1990 from the University of Calgary with a BSc., majoring in Geophysics. In 1990, he started his 25-year career at Schlumberger in Calgary. Skills were developed in borehole seismic processing starting from basic check-shots up to the most complex 3D VSPs. In 1997, he moved to Houston Texas, to open a new borehole seismic processing center. The center rapidly evolved into a global center of excellence for VSP processing. Campbell helped Schlumberger fully develop 3D VSP processing capabilities.
2010 to 2015 saw the development of many innovative techniques. The integration of borehole seismic data into the processing of surface seismic, to improve the resolution and depth control in seismic images, was finally realized. VSP is now routinely used to detect and characterize fractures, to estimation of the elastic properties of rocks, and to monitor the changes in reservoirs due to both enhanced recovery methods and storage of CO2.
From 2016 to the present, Campbell has been working as a geophysical consultant with VSP Consultants LLC. Projects have included work for major operators and service companies, supervising VSP processing projects. Interesting work is also being done on drill bit seismic in hard rock mining environments. VSP Consultants is also offering borehole seismic training courses to the oil and gas industry.

 

                    Learning Geoscience Logo

 

Explore other courses under this discipline:

 

A Comprehensive Overview of Seismic Data Processing Steps

Instructor: Mr Piet Gerritsma (Gerritsma Geophysical Training and Consultancy)

Seismic data processing can be characterized by the application of a sequence of processes where for each of these processes there are a number of different approaches. This course gives a comprehensive overview of the processes that are commonly applied in seismic data processing, both for land and marine seismic data, and discusses for each process the alternative implementations together with their inherent assumptions and strengths and weaknesses.

More information

An Introduction to Velocity Model Building

Instructor: Dr Ian Jones (ION)

The course will begin with a review of migration and then move-on to cover the motivations for building detailed velocity models, and briefly discuss the inherent limitations on our ability to build a detailed model. Current-day practice will be covered, exemplified via several case-studies and will end with a synopsis of the less well known and emerging techniques. Following the course, participants should understand how migration works, in terms of the approximations involved, and how this relates to the geology to be imaged, and also appreciate the limitations of current and future imaging and velocity estimation technology, so as to be able to decide what model building technique should be employed to image a given geological objective.

More information

Applications of Seismic Anisotropy in the Oil and Gas Industry

Instructor: Dr Vladimir Grechka (Marathon Oil Corporation)

Elastic anisotropy can strongly influence seismic data. This course discusses modeling, inversion and processing of seismic reflection and VSP data in the presence of anisotropy. The most critical step in extending the existing processing techniques to anisotropic media is to identify and estimate the medium parameters responsible for measured seismic signatures. The course emphasizes these parameters for vertical transverse isotropy – the anisotropic model usually associated with shales. Field-data examples illustrate the improvements in imaging achieved by anisotropic migration algorithms and the possibility of using anisotropy for lithology discrimination and fracture characterization.

More information

Borehole Seismic Fundamentals and Introduction to Advanced Techniques

Instructor: Mr Allan Campbell (VSP Consultants LLC)

This course serves as an introduction to the borehole seismic techniques being used by exploration geophysicists around the world. The fundamentals of acquisition, processing and interpretation are explored, and explained with case studies.
The course also covers more advanced uses of borehole seismic, including 2D and 3D imaging, seismic model calibration, time lapse reservoir monitoring, and fracture detection. Basics concepts of survey planning, acquisition and processing are covered. Estimation of anisotropy, Q, and measuring AVO are also covered.
The course also looks at the emerging Distributed Acoustic Sensing (DAS) technology. The course gives an introduction to crosswell seismic, and seismic while drilling.

More information

Seismic Multiple Removal Techniques: Past, Present and Future

Instructor: Dr Eric Verschuur (Delft University of Technology)

The main objective of this course is to provide the audience with an overview of the techniques in seismic multiple removal, starting with the deconvolution-based methods from the 1960s, via the move-out discrimination techniques of the 1980s and ending up with wave-equation based methods from the 1990s and their 3D extensions as developed in the 2000s. For each method some brief description of the theory in terms of mathematics is given. However, the emphasis in this course is not to thoroughly treat the mathematics but to present some understanding of the workings of each method.

More information

Understanding Seismic Anisotropy in Exploration and Exploitation: Hands On

Instructor: Dr Leon Thomsen (Delta Geophysics)

This course covers all areas of applied seismic anisotropy, with class exercises and ample time for full discussion. Because anisotropy is such a fundamental concept, it covers topics in seismic acquisition, processing, imaging and interpretation, all based on seismic rock physics.

More information

--