Volumes and Risks Assessment for Conventional and Unconventional Plays and Prospects
|Prof. Dr Alexei Milkov (Colorado School of Mines, Colorado, United States)|
|Geology - Geological Modeling|
|15 CPD points|
COAL CBM UNCERTAINTY PETROLEUM EXPLORATION VOLUMES OIL AND GAS SHALE RISKS UNCONVENTIONAL
The course enables participants to transform qualitative geological descriptions of plays and prospects into technically robust quantitative success-case and risked volumetric models. Obtained learnings will help participants to evaluate probabilities of success (PoS) for exploration plays, segments, prospects, wells and portfolios and to assess the range of petroleum volumes in exploration projects. Examples and case studies come from both conventional and unconventional plays, prospects and wells around the world. The learning objectives are achieved through well-illustrated lectures, numerous hands-on exercises and active class discussions.
We will cover the following topics:
- Play-based exploration;
- Assessment of success-case volumes for plays (conventional and unconventional), segments, prospects, wells and portfolios;
- Assessment of exploration risks and probabilities of success;
- Biases and logical fallacies in;
- Post-mortem analysis.
Upon completion of the course, participants will be able to:
- Use play-based exploration approach and tools (e.g., Common Risk Segment mapping, Field Size Distribution analysis, Creaming Curves etc.) to locate sweet spots in conventional and unconventional plays and assess remaining play/basin potential;
- Calculate deterministic potential (success-case) petroleum resources in conventional prospects and in unconventional plays. Assess and justify the range and probabilistic distribution of input parameters used in volumetric calculations;
- Assess geological risks and PoS for conventional and unconventional exploration, appraisal and development segments;
- Use industry-standard software (GeoX, REP or both) and run Monte-Carlo simulations to estimate unrisked and risked probabilistic volumes for plays, segments, prospects and wells;
- Recognize biases and logical fallacies common in exploration assessments and know how to correct them;
- Aggregate segments into a prospect and use risk and volumes dependencies between segments to estimate PoS and volumes for the prospect. Calculate PoS for wells;
- Aggregate prospects and wells into exploration portfolio. Predict the outcomes of portfolio drill-out;
- Evaluate drilling results to establish main reason(s) for well failure.
Day 1. Big picture trends in petroleum exploration. Play-based exploration. Fundamentals of volumetric and risk assessment for prospective segments.
The first day introduces the participants to global exploration trends and the concepts of Exploration Triangle and Play Based Exploration. You will learn the fundamentals of volumetric and risk assessment, the main definitions and the commonly used assessment tools (software).
• Welcome and introductions;
• Global trends in petroleum exploration since 1900;
• Play-based exploration;
• Common Risk Segment (CRS) maps;
• Field size distributions;
• Creaming curves;
• Yet-to-Find resources;
• Risk versus uncertainty;
• Deterministic and probabilistic volumes;
• Success-case and risked volumes;
• Software tools used in the assessment of prospective resources.
Day 1 exercises:
• Evaluate the play fairway, make CRS maps, locate sweet spots in the play;
• Build and evaluate field size distributions and creaming curves, define remaining play/basin potential.
Day 2. Basics of statistics, distributions and probabilities. Biases and fallacies in exploration. Volumetrics and risking for a segment of conventional petroleum resources.
The second day starts with the discussion of statistical parameters, distributions and probabilities. Participants will use real-world data (area, thickness, Net/Gross, porosity, saturation, Formation Volume Factor, Recovery Factor) to build distributions as inputs into volumetric models. This will be followed by the discussion of biases and fallacies in petroleum assessments and the tools that help reduce them. We will finish the day by doing hands-on assessment of volumes and risk for a conventional prospect.
• Meaning of basic statistical parameters (Mean, Mode, P10 etc.);
• Distributions appropriate to use in petroleum exploration projects;
• Where and how to get data to build distributions;
• Main biases and logical fallacies common in petroleum exploration;
• Techniques to reduce biases (Risk Tables, assurance teams);
• Assessment of volumes and geological PoS for a segment;
• Using information on Direct Hydrocarbon Indicators (DHIs) to update geological PoS;
• Assessment of geological risks for appraisal and development wells.
Day 2 exercises:
• Build porosity distribution for a segment;
• Calculate volumes and evaluate sensitivities to various inputs for a conventional oil segment.;
• Assess success-case volumes, geological PoS and risked volumes for a conventional oil segment (real prospect from offshore West Africa).
Day 3. Volumetrics and risking for unconventional plays. Aggregation of segments into prospect. Portfolio analysis. Post-drilling analysis.
The third day will start with the discussion of volumes and risk assessments for unconventional oil and gas plays (tight, shale, CBM). After that, we will discuss aggregation of segments into prospects and prospects into a portfolio. We will finish the course by studying how to do post-mortem analysis, learn from exploration successes and failures and become better explorers.
• Assessment of volumes and risks for unconventional plays;
• Aggregation of segments into prospect, with risk and volume dependencies;
• Calculation of PoS for prospects and wells;
• Aggregation of prospects into portfolio;
• Learnings from discovery wells;
• Learnings from dry holes;
• Full Cycle Economics evaluation.
Day 3 exercises:
• Assess in-place and recoverable volumes in unconventional shale gas and shale oil plays (real plays onshore Australia);
• Assess recoverable volumes for small(ish) acreage of unconventional tight oil in the USA (real play in the Powder River basin);
• Aggregate segments into a prospect, calculate values of PoS for the prospect and for the well;
• Evaluate a dry hole, determine the reason for well failure.
The course is designed for geoscientists, engineers and managers who work on exploration projects and require competency in the assessment of risks and volumes.
About the instructor
Alexei V. Milkov is Full Professor and Director of Potential Gas Agency at Colorado School of Mines and a consultant to oil and gas industry. After receiving PhD from Texas A&M University, Dr. Milkov worked for BP, Sasol and Murphy Oil as geoscientist and senior manager. He explored for conventional and unconventional oil and gas in over 30 basins on six continents and participated in the discovery of more than 4 Billion BOE of petroleum resources. He also worked on several appraisal and production projects. Dr. Milkov has deep expertise in oil and gas geochemistry, petroleum systems modeling, exploration risk analysis, resource assessments and portfolio management. He published 50 peer-reviewed articles. Dr. Milkov received several industry awards including J.C. “Cam” Sproule Memorial Award from the American Association of Petroleum Geologists (AAPG) for the best contribution to petroleum geology and Pieter Schenck Award from the European Association of Organic Geochemists (EAOG) for a major contribution to organic geochemistry.
Explore other courses under this discipline:
Instructor: Dr Dave L. Cantrell (Cantrell GeoLogic and Stanford University, USA)
Reservoir quality prediction has long been the ultimate goal of industry geologists, yet few have achieved this in a truly quantitative fashion. This workshop presents a new approach to reservoir quality prediction that involves the integration of a variety of modeling techniques to understand, quantify and predict the geological processes that control reservoir quality. Since initial reservoir quality is established at the time of deposition, numerical process models are used to predict initial reservoir quality; diagenetic process models are then used to modify these initial results and ultimately produce a quantitative and geologically-based prediction of present-day subsurface reservoir quality.
Instructors: Prof. Dr Stephen Tyson and Dr Ing Sebastian Hörning (Universiti Teknologi Brunei and The University of Queensland)
The course will show the attendees how to test for linear spatial dependence and introduce the concepts of non-linear geostatistics. Attendees will develop an excel spreadsheet and a python notebook which can be used for spatial data analysis and non-linear stochastic simulation. Existing geostatistics algorithms based on the kriging matrix can be shown to underestimate the connectivity of extreme values because they assume a linear spatial dependence model. Moreover, the estimation of uncertainty based on these techniques uses the kriging variance, which is not dependent on the values of the spatially distributed variable. It can also be shown that these uncertainty estimate are often implausible. This course will explain the reasons why most spatial variables in geoscience do not have a linear spatial dependence, even after monotonic transformations, and what the impact of this in the estimation of petrophysical properties. The course will show the attendees how to test for linear spatial dependence and introduce the concepts of non-linear geostatistics. Attendees will develop an Excel spreadsheet and a python notebook which can be used for spatial data analysis and non-linear stochastic simulation.
Instructor: Mr Jean-Jacques Biteau (retired from Total E&P, France)
This course on 'Petroleum Exploration Strategy' focuses on aspects like the evaluation of exploration projects (working sequence, costs, economic criteria etc), partnerships, contracts and mining acreage, but also on the missions and role of a geoscience/exploration manager.
Case studies from various regions are an important part of this course.
Instructor: Prof. Dr Alexei Milkov (Colorado School of Mines, USA)
The course enables participants to transform qualitative geological descriptions of plays and prospects into technically robust quantitative success-case and risked volumetric models. Obtained learnings will help participants evaluate probabilities of success (PoS) for exploration plays, segments, prospects, wells and portfolios and to assess the range of petroleum volumes in exploration projects. Examples and case studies come from both conventional and unconventional plays, prospects and wells around the world. The learning objectives are achieved through well-illustrated lectures, numerous hands-on exercises and active class discussions. We will cover:
- Play-based exploration;
- Assessment of success-case volumes;
- Assessment of exploration risks/PoS;
- Post-mortem analysis.
Instructor: Dr Bjorn Wygrala (Schlumberger)
The term “Petroleum Systems” and the technology “Basin and Petroleum Systems Modelling” will be introduced by showing applications in areas with critical exploration challenges, including salt basins and thrustbelts. Technical breakthroughs in the last 10-15 years have been the extension of the technology from 2D to 3D, and the ability to perform multi-phase petroleum migration modelling using different methods in high resolution geological models. This enables temperature, pressure and petroleum property predictions to be made with higher levels of accuracy and in the most complex geological environments such as in the sub-salt or in thrustbelts. Case studies will be used with live software presentations to illustrate key points. Applications of the technology will range from frontier exploration in which large areas with only sparse data are screened, to detailed assessments of exploration risks in structurally complex areas, to petroleum resource assessments of yet-to-find oil and gas.
Instructor: Prof. Dr Michael Poppelreiter (University Technology Petronas)
The most universal, comprehensive and concise descriptive documents on oil and gas wells are well logs. They impact the work of almost every oil field group from geologists to roustabouts to bankers. Familiarity with the applications of well logs is therefore essential for people forging their careers in the oil business. The instructor uses a core-based approach to help participants develop a good grounding in understanding and applying well logging techniques. General principles of physics are presented to explain the functioning of modern logging tools. Wherever possible, the physics of logging measurements is related to everyday tools and applications. Cross-plotting and reconnaissance techniques quickly and efficiently discriminate between water, oil and gas. Error minimization techniques, applicable only to computerized log analysis, produce optimal results. Participants benefit from realistic experience by working in teams on a comprehensive log interpretation exercise.
Instructor: Prof. Dr Richard Swarbrick (Swarbrick GeoPressure Consultancy)
All wells drilled require a pre-drill prediction of pore fluid and fracture pressures which defines the drilling window. This course explains the objectives, methods and uncertainties of prediction, based on extensive global experience. The necessary understanding of the geological/geophysical context of abnormal pressures leading to standard algorithms will be provided. Part of the challenge is terminology and contrasting display methods of geoscience and operations/drilling groups. Both approaches are necessary and investigated in the interactive exercises which will form an essential component of the course.
Instructor: Dr Dirk Nieuwland (NewTec International)
Unconventional hydrocarbon systems require unconventional approaches to decide on drilling locations and development techniques. The information contained in natural fracture systems can be used to support the drilling and well stimulation technique for the development of unconventional hydrocarbon systems such as shale gas. This short course is based on geomechanics as a technique that can be used to understand and to develop unconventional hydrocarbon systems such as shale gas systems, and fractured crystalline basement, where conventional logging and seismic systems are inadequate.
Instructor: Dr Tim Wynn (AGR TRACS International Ltd)
Reservoir modelling for field development planning is a well-accepted process but its application to fractured reservoirs requires specific considerations which are less commonly known. This course describes a practical methodology for building 3D static (“geocellular”) reservoir models for naturally fractured reservoirs using standard modelling software, covering such considerations. The issues addressed include the integration of log, core and seismic data, the sourcing and application of in situ stress data, the process of defining and building the static reservoir model itself, and the creation of output in a form appropriate for dynamic modelling using dual porosity reservoir simulators where appropriate. More complex workflows using discrete fracture networks will also be summarised, as will general issues of fracture description, uncertainty-handling and volumetrics.
Instructor: Prof. Dorrik Stow (Heriot-Watt University)
Sandstones deposited in deep marine environments form important hydrocarbon reservoirs in many basins around the world. Interbedded mudstones can be important as source rocks, as well as acting as barriers, baffles and seals. Deepwater reservoirs are currently the principal target for oil and gas exploration, with over 1600 existing turbidite fields and plays.
Instructors: Dr Mark Bentley (AGR TRACS International) and Prof. Philip Ringrose (Equinor)
This short course will provide an introduction to reservoir model design, covering the following main design elements:
- Model purpose;
- The rock model;
- The property model;
- Model scaling;
- Handling uncertainty.