Basic Geophysical Data Acquisition and Processing
|Dr Jaap C. Mondt (Breakaway, Netherlands)|
|Geophysics – Seismic Acquisition and Processing|
|25 CPD points|
This course treats various geophysical methods, from gravity to magnetics, electrical, electro-magnetic, refraction and reflection seismic. It will be taught not only by explaining and discussing the methods, but above all by applying the theory in mainly Excel based assignments.
Various kinds of geophysical data are available. They are usually separated into Non-seismic and Seismic data. Non-seismic data (gravity, magnetics, electrical, electromagnetics, spectral, etc.) is the main data used in shallow subsurface applications (engineering, mapping pollution, archaeology, etc.) and at the early exploration stage in the search for oil, gas or minerals. Seismic is the main subsurface evaluation tool for the EP industry, but it has its limitations. Therefore, non-seismic methods are used successfully as complementary tools at the more mature exploration stages and even for production. In combination with seismic data they can significantly reduce the uncertainty of subsurface models as they measure different physical properties of the subsurface. Controlled Source EM, for example, responds to reservoir resistivity and can thus be used to differentiate between hydrocarbons and brine in a geological structure mapped by seismic.
The main topics covered by the programme are:
- Gravity surveying
- Magnetics surveying
- Electrical surveying
- Electro-Magnetic surveying, including Ground Penetrating Radar
- Acquisition of shallow refraction seismic data
- Acquisition of reflection seismic data
- When to use 2D, 3D and 4D seismic / non-seismic
- Principles of wave propagation
- Basic designs of 2D and 3D seismic acquisition
- Processing of seismic and GPR data with the objectives of improving signal-to-noise ratio, vertical and lateral resolution
- From simple migration to Imaging
- Result in depth (Time-to-Depth conversion)
- What to spend on a new survey, be-it a new survey or a reprocessing or re-interpretation project. Hence, to determine whether the expected reward (increase in value) is higher than the cost of the project. In short, what is the value of the new information obtained (VOI: Value Of Information)
At the end of the course, participants will have a good understanding of what information various geophysical data can give and for what purposes it can be used. This will enable them to specify the requirements for a survey or a reprocessing or interpretation project, either done in-house or by a specialised service provider.
Other benefits include:
- Place and value geophysical activities in a multi-disciplinary context
- Judge the merits of various geophysical techniques
- Better liaise and collaborate with staff in related disciplines
- Recognise artefacts and direct hydrocarbon indications on seismic
- Value novel developments such as time lapse methods for hydrocarbon reservoir monitoring or pollution control.
- Part 1: The principles and limitations of Geophysical methods
- Part 2: Gravity surveying, Magnetic surveying, Electrical surveying
- Part 3: Electro-Magnetic surveying
- Part 4: Seismic Refraction surveying
- Part 5: Seismic Reflection surveying
- Part 6: Value of undertaking a new project (VOI)
The course is designed for Geologists, Geophysicists and Petroleum Engineers involved in exploration and development of oil and gas fields and for those involved in projects related to the shallow subsurface (monitoring pollution). In addition, it would be useful for those dealing with the effects of production of a field (subsidence, earth tremors).
A reasonable level of understanding of mathematics and physics is assumed.
About the instructor
Dr Jaap C. Mondt obtained a Bachelors degree in Geology at the University of Leiden followed by a Masters degree in Theoretical Geophysics and a PhD on “Full wave theory and the structure of the lower mantle” at the University of Utrecht. Dr Mondt then joined Shell Research in The Netherlands to develop methods to predict lithology and pore-fluid based on seismic, petrophysical and geological data. Subsequently he worked at Shell Expro in London to interpret seismic data from the Central North Sea Graben. After his return to The Netherlands, he headed a team for the development of 3D interpretation methods using multi-attribute statistical and pattern recognition analysis on workstations. After a period of Quality Assurance of “Contractor” software for seismic processing, he became responsible for Geophysics in the Shell Learning Centre. During that time he was in addition part-time professor in Applied Geophysics at the University of Utrecht. From 2001 till 2005 he worked on the development of Potential Field Methods (Gravity, Magnetics) and EM methods (CSEM) for detecting oil and gas. After his retirement from Shell, he founded his own company (Breakaway), specialised in courses on acquisition, processing and interpretation of geophysical data (seismic, gravity, magnetic and electromagnetic data). In addition to providing support to the Shell Learning Centre, he gives his own courses to International as well as National energy companies.
An Introduction to Geophysical Exploration, Kearey, Brooks, Hill, ISBNB0-632-04929
Explore other courses under this discipline:
Instructor: Dr Mike Branston (WesternGeco)
The course is designed to familiarize the student with the latest developments in Marine Seismic Acquisition including Wide-Azimuth with its many geometry variants, Broadband techniques (boosting the high and low frequencies), seabed receivers for both P-wave and Converted-wave recording, simultaneous source acquisition, and methodologies to improve efficiency. The course starts with an overview of conventional 3D towed streamer seismic acquisition and then concentrates on recent advances that have enabled dramatic improvements in seismic data quality and interpretability.
Instructor: Mr Jack Bouska (Independent Consultant)
This course covers modern techniques in 3D seismic acquisition, from the perspective of seismic as an integrated system comprising: acquisition design, field operations, data processing, imaging, and interpretation. This one day course will review the basics of 3D survey design, with emphasis on how practical aspects of interpretation, data processing, imaging and/or field operations can either constrain.
Instructor: Mr Jan de Bruin (Project Manager - Seismic Acquisition)
Existing courses and books with the title `seismic acquisition' typically deal with designing seismic surveys. Although I treat design in a somewhat less conventional way, it is an important part of this course too, but other equally important subjects receive equal attention. These are: Clients, Finance, Procurement, Scouting, Communities, Execution, Equipment, HSE and Project Management. Any serious flaws in either of these can make a seismic survey less successful or fail altogether. Although these elements have nothing to do with Geophysics, they are essential ingredients of Seismic Acquisition. The course will look at all this from the perspective of seismic companies as well as oil companies
Instructor: Dr Cyrille Reiser (Petroleum Geo-Services)
The main aim of this course is to provide a very accessible overview of the many concepts behind broadband seismic (primarily offshore) and its implication for the reservoir focused asset based geoscientist. This will be done through the a very comprehensive set of case study material from all regions of the world and for various stages of the exploration, appraisal and development asset life cycle. The course aims to objectively discuss the various broadband seismic technologies and commercial offerings available today and their respective merits with regards to quantitative reservoir characterization and reservoir imaging using real world application examples. The course will further attempt to identify possible pitfalls and issues with regards to the treatment of broadband data that might lead to flawed or erroneous QI.
Instructor: Mr Mark Thompson (Statoil)
The use of Ocean Bottom Seismic (OBS) is increasingly more utilised. The placement of receivers on the sea floor, allows for measurement of both pressure and shear waves, while the decoupling of source effort from receiver effort allows for full azimuth imaging. The characteristics of OBS creates challenges, which need to be addressed in survey design, acquisition, processing, imaging and interpretation. Through examples, successful use of this technology will be demonstrated.
Instructor: Dr Robert Soubaras (CGG)
This one-day course is intended to explain how, by combining advances in equipment, acquisition design and processing, the bandwidth of marine seismic images has been increased recently from 3 to 6 octaves. The course starts with a theoretical part that provides a unified framework allowing to cover the theory of the various marine broadband methods that are currently used (over-under, dual sensor, variable-depth), with the aid of synthetic examples as well as real data results based on the variable-depth streamer method. After the specific receiver deghostings are addressed, other processing steps that have to be adapted to broadband data are described.
Instructor: Mr Cedric Fayemendy (Statoil)
Geophysical Reservoir Monitoring (GRM) of reservoirs relies on frequent time-lapse observations with high-survey repeatability. This technology is a key enabler for maximizing the oil recovery of oil and gas fields. The GRM technology aims at understanding and updating the knowledge of producing reservoirs. This is achieved through mapping the movement of fluid and pressure fronts and fluid contacts during production and injection. The combination of production monitoring with repeated seismic acquisition and geological and reservoir information provides reliable estimates of static and dynamic reservoir parameters. The lecture will first review the geophysical reservoir monitoring history at Statoil. We will share our experience with 4D processes, resources allocation and the overall monitoring strategy. The lecture will also cover challenges in understanding the 4D responses and value creation. Finally, we will look at how we push the GRM technology towards higher use of quantitative results.
Instructor: Dr Anatoly Cherepovskiy (Independent Consultant)
This course will provide information related to recent trends and advances in land seismic data acquisition technology, equipment and the methodologies that are being utilized to improve seismic imaging quality and productivity of 3D acquisition with an emphasize on the high-end surveys as performed in open areas. The course will not cover the fundamentals of 3D and multicomponent seismic survey design, although there will be a section that will give a review of recent survey design approaches and principles.
Instructor: Mr Paul Ras (SD2I Geophysical Consulting)
This course presents an integrated approach to modern land 3D survey design as it has a key role in the seismic value chain going from acquisition to processing, imaging and inversion and characterization. It describes the main technology advances in land acquisition: high-channel count single sensor (point receiver), simultaneous source high-productivity vibroseis, broadband and wireless nodal systems. New acquisition technology has in turn inspired progress in processing, imaging and inversion and characterization. Survey designs have changed accordingly; wide azimuth high-density surveys are now the norm in many environments. And the survey design workflow now includes single sensor, single source, simultaneous source, broadband, symmetric sampling, cross-spreads, spatial continuity and more powerful 5D interpolation methods. It has also become more integrated, with requirements from inversion and characterization, imaging and processing feeding back to the design and hence acquisition.
Instructor: Dr Jaap C. Mondt (Breakaway, Netherlands)
This course presents various geophysical methods from gravity to magnetics, electrical, electro-magnetic, refraction and reflection seismic.
Instructor: Dr Jaap C. Mondt (Breakaway, Netherlands)
The course deals with advanced methods of seismic acquisition and processing. It will be taught not only by explaining the methods, but above all by applying the theory in mainly Excel based assignments.