Applied Depth Imaging
|Dr Ruben Martinez (Reservoir Geoscience, Texas, United States)|
|Geophysics – Surface Imaging|
|10 CPD points|
ANISOTROPY 3D DEPTH MIGRATION FULL WAVEFIELD SALT INTERPRETATION MODELING TRAVELTIME SHALE WATER WIDE-AZIMUTH RTM NEAR SURFACE
Hydrocarbons are increasingly more difficult to find because reservoirs are often located in geologically complex areas. This geological complexity has motivated a significant paradigm shift from time imaging towards the extensive use of seismic depth imaging. Depth imaging improves the definition of the structural and stratigraphic frameworks and provides a better assessment and mitigation of risk in E&P.
The goal of this course is for the participant to gain an understanding of the basic concepts and practical aspects used in building velocity models and seismic images in the depth domain in an intuitive manner. The participant will also be exposed to depth imaging practices currently in use by geophysicists and geoscientists through the description of workflows illustrated with synthetic and field data examples. The practical aspects are emphasized throughout the course.
At the end of the course, the emerging depth imaging technologies are reviewed for the participant to make informed decisions about what technology to use in future E&P projects.
The aim of this course is focused on depth imaging concepts and applications for complex geology areas. At the end of the course, the participant will be able to:
1. Understand the fundamentals of seismic migration;
2. Explain the pitfalls of time imaging;
3. Describe the differences between time and depth seismic imaging for simple and complex geological structures and stratigraphy;
4. Discuss basic seismic acquisition parameters influencing the quality of the seismic images in complex geology areas;
5. Understand the strengths and weaknesses of the most popular prestack depth migration methods;
6. Recognize the limitations of the seismic data to produce optimum seismic images for complex structural and stratigraphic frameworks;
7. Describe velocity estimation methods required for specific exploration and field development scenarios;
8. Explain the impact of velocity anisotropy on the quality of depth images and its effect on the spatial positioning of geological structures and well ties;
9. Define and/ or choose depth imaging workflows for specific E&P scenarios such as sub-salt, pre-salt, thrust belt, sub-basalt, complex carbonates and clastics;
10. Judge the quality of seismic depth images for a geologic interpretation;
11. Interpret depth-imaged data;
12. Make informed decisions to choose depth imaging workflows and technologies to be used in a given exploration or field development project;
13. Effectively communicate about emerging depth imaging methods and technology.
1. Introduction to the course.
2. Seismic migration fundamentals.
3. Understanding seismic velocities.
4. Practical understanding of velocity anisotropy.
5. Review of velocity estimation methods used for depth imaging.
6. Seismic data conditioning for depth imaging.
7. Isotropic and anisotropic velocity model building and imaging in practice.
8. Optimization of seismic images for a more reliable geologic interpretation.
9. Overview of emerging velocity model building and imaging methods.
This course is designed for geophysicists, geoscientists and time processing and interpretation specialists seeking a practical understanding of depth velocity model building and imaging.
It is desirable that the participants have a basic knowledge about seismic acquisition, processing and interpretation. Some basics of structural geology, stratigraphy and well logging are also desirable but not required.
About the instructor
Ruben D. Martinez is a Petroleum Geoscience Consultant and instructor with Reservoir Geoscience, LLC. He has been active in the seismic industry for 40 years.
Martinez was associated with Geophysical Service Inc. (GSI) as R&D Reservoir Geophysicist, Halliburton Geophysical Services (HGS) and Western Geophysical as Senior Research Geophysicist, AGI as director of Seismic Reservoir Characterization and Petroleum GeoServices (PGS) as Manager Signal Processing R&D, VP Processing R&D, VP Seismic Processing Technology, Global Chief Geophysicist I&E and Chief Geophysicist I&E NSA. His responsibilities in PGS included directing global R&D and software commercialization of processing and imaging technologies. As Chief Geophysicist, he was responsible for the supervision and quality assurance of depth imaging projects, customer liaison, the promotion of best practices and the commercialization and use of high-end technology. Martinez is author and co-author of more than 70 technical papers published and/or presented at international conferences and 12 patents on seismic data acquisition, processing and imaging. He has also made numerous technical presentations at international conferences and has taught numerous courses and conducted seminars and workshops on seismic processing and imaging.
In 2005, he was invited to present the annual Milton B. Dobrin lecture at the University of Houston. He is currently an instructor of the Continuing Education Program of the Society of Exploration Geophysicists (SEG) and the European Association of Geoscientists and Engineers (EAGE). He is a member of the SEG Board of Directors as Director at Large. Martinez was the recipient of the 2014 Mexican Association of Exploration Geophysicists (AMGE) geophysics award for life-long achievements to geophysics.
He earned a BSc in Geophysics from the Instituto Politecnico Nacional (Mexico), MSc in Geophysics from the Colorado School of Mines and a PhD in Geosciences from the University of Texas at Dallas.
He is a member of the Society of Exploration Geophyscists (SEG), European Association of Geoscientists and Engineers (EAGE), Geophysical Society of Houston (GSH), American Association of Petroleum Geologists (AAPG) and Asociacion Mexicana de Geofisicos de Exploracion (AMGE).
Any general technical reading on basic seismic acquisition, seismic processing, time imaging, seismic interpretation, structural geology and/or salt tectonics will help to maximize the learning experience of the participant.
Explore other courses under this discipline:
Instructor: Prof. Tariq Alkhalifah (KAUST)
The course starts by introducing the fundamentals of full-waveform inversion (FWI) starting from its basic definition. It focuses on the model update issues and provides analysis of its probable success in converging to a plausible model. In the course we will discuss the many challenges we face in applying FWI on seismic data and introduce modern day proposed solutions to these challenges. The focus of the course will be on FWI applied to anisotropic media. As a result, the course will also introduce anisotropy, its optimal parametrization and wavefield simulation in such media. Practical multi-parameter inversion for anisotropic parameters requires an optimal FWI setup. We will discuss such a setup, which includes the proper parametrization of the medium and data access scheme necessary for a potential convergence to a plausible anisotropic model.
Instructor: Dr Gerard Schuster (KAUST)
This one-day course is designed for a broad range of seismic researchers, data processors, and interpreters working in the petroleum industry. The course teaches the principles of seismic interferometry, ambient noise seismology and their applications to surface seismic, VSP, and OBS data. The ultimate objectives are to enable geophysicists to evaluate the potential of seismic interferometry in uniquely solving their problems.
Instructors: Prof. Evgeny Landa (Tel Aviv University) and Dr Tijmen Jan Moser (Moser Geophysical Services)
Diffractions have been identified as the key seismic manifestation of fractures and other small-scale reservoir heterogeneities. This two-day course will present the current state-of-the-art of diffraction technology and put this in context by a review of its past developments. The course will cover both forward diffraction modeling and diffraction imaging. Case studies of diffraction imaging will be presented covering applications in seismic exploration and other areas of geoscientific interest.
Instructor: Prof. Dr Aldo Vesnaver (The Petroleum Institute)
Building a 3D Earth model in depth is needed not only for accurate seismic imaging, but also for linking well data (as logs and cores) and reservoir simulations. Tomography can build a 3D macro-model for P and S velocities that integrates surface and well data, as well as active and passive seismic. This short course will introduce the basic concepts of traveltime inversion keeping all the math at a very basic level.
Instructor: Dr Ruben Martinez (Reservoir Geoscience)
This course has two main segments. In the first segment, the participant will understand the basic concepts behind the tools commonly employed in velocity model building and depth migration.
In the second segment, the participant will learn how to use these tools for building velocity models and generate seismic images in depth using practical work flows for a variety of complex geologic scenarios. At the end of the course, an overview of the emerging depth imaging technologies is presented.
Instructor: Prof. Evgeny Landa (Tel Aviv University)
While depth imaging play an increasing role in seismic exploration, data analysis and imaging in time domain play an important role. Moreover, for complex models that request the use of prestack depth migration, time imaging usually constitutes a key first step. The proposed course discusses: a) data analysis and imaging based on new procedures such as Multifocusing and Common Reflection Surface; b) diffraction Imaging based on diffracted energy targeting to image small scale subsurface objects; c) imaging without precise knowledge of the subsurface velocity model (path summation); d) pitfalls and challenges of seismic inversion.
Instructor: Mr Etienne Robein (ERT)
The course will present in simple terms (cartoons rather than equations!) the principle of different techniques in each class of methods (Kirchhoff, Beam Migrations, WEM, RTM), while pointing out their respective merits and limitations. Similarities and differences between Time- and Depth-Imaging will be briefly reminded. In parallel, special emphasis is put on methods used to build the necessary anisotropic velocity models. Both Ray-based techniques (linear and non-linear tomography) and wavefield extrapolation-based ones, including Full Waveform Inversion, are addressed.
Instructor: Prof. Dr Dries Gisolf (Delft Inversion)
This two-day course will start with an introduction and a short recap on complex integral transforms (Fourier, Laplace, F/K and linear Radon). Followed by topics on: - The acoustic wave equation in inhomogenous media - Integral representations of the acoustic wave equation; Kirchhoff-Rayleigh and the Scattering Integral (Lippmann-Schwinger) - The AVO data model; Zoeppritz reflection coefficients - Linear inversion of AVO data including regularisation; synthetic and real data examples - The non-linear data model for inversion; data equation and object equation; iterative, multiplicatively regularised inversion - Applications based on an elastic full-wavefield non-linear data model; realistic synthetic reservoir study, real data case studies including low-frequency model extraction and seismic-to-well matching. Synthetic time-lapse example.
Instructor: Mr Piet Gerritsma (Gerritsma Geophysical Training and Consultancy)
The process of migration, whereby a proper image in time or depth of the subsurface is obtained, is directly related with the velocity model that both serves as input for the migration process as well as is the result of such a migration. Therefore migration and velocity model building are intimately related processes and often applied in an iterative mode. This course gives an overwiew with theory and implementation of the representative migration algorithms as well as of the multitude of ways to build and update subsurface velocity models.
Instructor: Prof. Dr Dries Gisolf (Delft Inversion)
This course presents a systematic approach to imaging of acoustic reflection data and the extraction of media property information from the image amplitudes, based on wave theory. Although the approach is valid for a wide range of acoustical frequencies and applications, there is a bias towards seismic imaging.