Integrated Seismic Acquisition and Processing
|Mr Jack Bouska (Independent Consultant, Calgary, AB, Canada)|
|1 or 2 days|
|Geophysics – Seismic Acquisition|
|5 or 10 CPD points|
3D OBC INTERPRETATION IMAGING OFFSHORE SAND SPARSE DATA SURVEY DESIGN VIBROSEIS DYNAMITE LAND SEISMIC MAPPING MIGRATION SENSORS ONSHORE DENSE SURVEYS DYNAMITE NEAR SURFACE WAVE PROPAGATION
This course covers both modern and future practices in 3D seismic acquisition survey design and field operations. The seismic experiment is introduced as part of a larger integrated system, one composed of acquisition design, field operations, data processing, imaging and interpretation. This one- or two-day course emphasizes how real-world aspects of interpretation, data processing, imaging and field operations can either constrain or liberate various survey design parameter choices.
The course material conveys the full breadth of knowledge and tools required to select and adjust survey design parameters for optimum imaging of the subsurface target, while honouring equipment limits and surface constraints. The syllabus develops a practical set of survey design skills, using a combination of both presentations and in-class exercises. This knowledge and skill base is also reinforced using specific examples of cutting edge seismic acquisition projects from around the globe. All case histories were selected to emphasize the value of long offset, wide azimuth and simultaneous source techniques for onshore and offshore ocean bottom seismic acquisition 3D designs, employing both large and small field crews.
Each participant will gain exposure to the core principals of seismic 3D survey design, along with practice in selecting a balanced set of 3D acquisition geometry parameters for both optimum field implementation and competent data processing. Students will also learn how those parameter choices directly affect acquisition operations, data processing and the quality of the final image volume.
- Foundations of seismic system integration and subsurface mapping;
- Methods of acquiring seismic data, to image the subsurface;
- Optimum processing of wide azimuth seismic data, to image the subsurface;
- Introduction to the survey design study, a data driven investigation into survey objectives, mapping requirements and geographic constraints;
- The survey design procedure, techniques for selecting a balanced set of 3D geometry parameters;
- Offshore Ocean Bottom Seismic 3D survey design, with worked examples;
- Onshore 3D seismic surveys using explosive sources, with worked examples;
- Onshore 3D seismic surveys using Vibroseis sources, with Simultaneous Source examples.
The course is designed for:
- Seismic acquisition specialists who wish to learn more about designing cost-effective acquisition programmes, that are well matched to state-of-the-art processing and imaging techniques, along with strategies to exploit the future of high channel count crews in order to create ultra-high quality images;
- Seismic processing specialists who wish to learn about how acquisition geometry parameter choice directly affects the ability to attenuate noise, and image the subsurface, in the context of a modern processing scheme
- Seismic interpreters with a desire to know more about both of the above.
Participants are assumed to possess a working knowledge of the reflection seismic method and its use in exploration and reservoir management.
About the instructor
Jack Bouska graduated with a Geophysics degree from the University of Alberta (1980), and started working at Seiscom-Delta (1981) then moved to Western Geophysical (1983), before joining Dome Petroleum in 1985, persevering through the Dome-Amoco-BP mergers of 1988 & 1998. His career included residence in; London U.K., Muscat Oman, and Calgary Alberta, while tackling a wide variety of projects spanning across five continents. Initial projects included revitalizing cost effective exploration for Amoco Canada using his invention of Sparse-3D, later expanding into the S. American Andes, designing and acquiring some of the world’s largest Heli-portable 3D’s. His innovation at BP continued with novel acquisition techniques for Seabed OBC-3D’s in the North Sea, Caspian Sea, Gulf of Suez, Abu Dhabi, Indonesia and West of Shetlands. While in the UK, Jack also acted as team Leader for the upstream technology Reservoir Management team, prior to moving to Oman as the Middle East region Seismic Delivery Manager, where he instigated several ultra-high speed Vibroseis surveys made possible by his invention of Distance Separated Simultaneous Sweeping (DS3). While in Oman, he also invented a new type of seismic sensor and autonomous node recorder, resulting in several patents (as inventor) and a commercial implementation (the BP-Schlumberger-Rosneft Nimble Node). In 2013 he moved back to Calgary as regional seismic delivery manager for BP’s Oil Sands and Canadian offshore seismic programs, before retiring in 2015, and turning his attention to industry training and consultation.
As an author of more than 50 industry papers and technical presentations, Jack's innovations in seismic acquisition design and processing have been recognized by numerous geophysical societies; including the CSEG with the Best Theme Paper award in 1995, Best of Session papers in 1997 & 98 and best technical luncheon talk of 2014. The SEG also awarded Jack the Best Paper in the Leading Edge 2005, and Honourable Mention in Best Paper category, 2005 National convention. Jack has served as an EAGE Distinguished Lecturer for 2007-2008 and in 2009, the Society of Exploration Geophysicists selected him as the spring SEG Distinguished Lecturer in Geophysics.
Jack is an active member of the EAGE, SEG, CSEG, and APEGA.
Explore other courses under this discipline:
Instructor: Prof. Tariq Alkhalifah (KAUST)
The course starts by introducing the fundamentals of full-waveform inversion (FWI) starting from its basic definition. It focuses on the model update issues and provides analysis of its probable success in converging to a plausible model. In the course we will discuss the many challenges we face in applying FWI on seismic data and introduce modern day proposed solutions to these challenges. The focus of the course will be on FWI applied to anisotropic media. As a result, the course will also introduce anisotropy, its optimal parametrization and wavefield simulation in such media. Practical multi-parameter inversion for anisotropic parameters requires an optimal FWI setup. We will discuss such a setup, which includes the proper parametrization of the medium and data access scheme necessary for a potential convergence to a plausible anisotropic model.
Instructor: Dr Gerard Schuster (KAUST)
This one-day course is designed for a broad range of seismic researchers, data processors, and interpreters working in the petroleum industry. The course teaches the principles of seismic interferometry, ambient noise seismology and their applications to surface seismic, VSP, and OBS data. The ultimate objectives are to enable geophysicists to evaluate the potential of seismic interferometry in uniquely solving their problems.
Instructors: Prof. Evgeny Landa (Tel Aviv University) and Dr Tijmen Jan Moser (Moser Geophysical Services)
Diffractions have been identified as the key seismic manifestation of fractures and other small-scale reservoir heterogeneities. This two-day course will present the current state-of-the-art of diffraction technology and put this in context by a review of its past developments. The course will cover both forward diffraction modeling and diffraction imaging. Case studies of diffraction imaging will be presented covering applications in seismic exploration and other areas of geoscientific interest.
Instructor: Prof. Dr Aldo Vesnaver (The Petroleum Institute)
Building a 3D Earth model in depth is needed not only for accurate seismic imaging, but also for linking well data (as logs and cores) and reservoir simulations. Tomography can build a 3D macro-model for P and S velocities that integrates surface and well data, as well as active and passive seismic. This short course will introduce the basic concepts of traveltime inversion keeping all the math at a very basic level.
Instructor: Dr Ruben Martinez (Reservoir Geoscience)
This course has two main segments. In the first segment, the participant will understand the basic concepts behind the tools commonly employed in velocity model building and depth migration.
In the second segment, the participant will learn how to use these tools for building velocity models and generate seismic images in depth using practical work flows for a variety of complex geologic scenarios. At the end of the course, an overview of the emerging depth imaging technologies is presented.
Instructor: Prof. Evgeny Landa (Tel Aviv University)
While depth imaging play an increasing role in seismic exploration, data analysis and imaging in time domain play an important role. Moreover, for complex models that request the use of prestack depth migration, time imaging usually constitutes a key first step. The proposed course discusses: a) data analysis and imaging based on new procedures such as Multifocusing and Common Reflection Surface; b) diffraction Imaging based on diffracted energy targeting to image small scale subsurface objects; c) imaging without precise knowledge of the subsurface velocity model (path summation); d) pitfalls and challenges of seismic inversion.
Instructor: Mr Etienne Robein (ERT)
The course will present in simple terms (cartoons rather than equations!) the principle of different techniques in each class of methods (Kirchhoff, Beam Migrations, WEM, RTM), while pointing out their respective merits and limitations. Similarities and differences between Time- and Depth-Imaging will be briefly reminded. In parallel, special emphasis is put on methods used to build the necessary anisotropic velocity models. Both Ray-based techniques (linear and non-linear tomography) and wavefield extrapolation-based ones, including Full Waveform Inversion, are addressed.
Instructor: Prof. Dr Dries Gisolf (Delft Inversion)
This two-day course will start with an introduction and a short recap on complex integral transforms (Fourier, Laplace, F/K and linear Radon). Followed by topics on: - The acoustic wave equation in inhomogenous media - Integral representations of the acoustic wave equation; Kirchhoff-Rayleigh and the Scattering Integral (Lippmann-Schwinger) - The AVO data model; Zoeppritz reflection coefficients - Linear inversion of AVO data including regularisation; synthetic and real data examples - The non-linear data model for inversion; data equation and object equation; iterative, multiplicatively regularised inversion - Applications based on an elastic full-wavefield non-linear data model; realistic synthetic reservoir study, real data case studies including low-frequency model extraction and seismic-to-well matching. Synthetic time-lapse example.
Instructor: Mr Piet Gerritsma (Gerritsma Geophysical Training and Consultancy)
The process of migration, whereby a proper image in time or depth of the subsurface is obtained, is directly related with the velocity model that both serves as input for the migration process as well as is the result of such a migration. Therefore migration and velocity model building are intimately related processes and often applied in an iterative mode. This course gives an overwiew with theory and implementation of the representative migration algorithms as well as of the multitude of ways to build and update subsurface velocity models.
Instructor: Prof. Dr Dries Gisolf (Delft Inversion)
This course presents a systematic approach to imaging of acoustic reflection data and the extraction of media property information from the image amplitudes, based on wave theory. Although the approach is valid for a wide range of acoustical frequencies and applications, there is a bias towards seismic imaging.